NG TA Specification

This should be read in conduction with the attached notes and the current Motorsport UK Competitor’s Yearbook

Manufacturer(s)NG Cars & TA Motor Co
ModelTA
ExampleNG TA
Minimum Wheelbase91in (231cm)
Diameter of Road Wheels14in
Number of Seats2
Minimum Horizontal Dimension from Rearmost part of steering wheel and a vertical line through the axis of the rear wheels39in (99cm)
EnginesBL/Rover “B” Series
GearboxesAs fitted to MGB
Rear Axle CasingsBL/Rover “B” Series
Maximum horizontal dimension from the centre of the foremost spark plug orifice and a vertical line through the axis of the front wheels5in (127mm)
Notes

(a) See permitted modifications listed under M6.4.1 and restriction stated in M6.4.2 In relation to listed cars, any further modifications will cause the vehicle to be reclassified into class 8.

(b) M6.7.1 – The use of wheels of diameter(s) other than as specified above will cause the vehicle to be reclassified into class 8.

  1. M6.8.1 & M6.8.3 The use of gearbox and rear axle casings other than as specified above will cause the vehicle to be reclassified into class 8.
  2. The seats in the rear of this vehicle is not considered to be part of seating compartment for the purposes of M3.2.12

Comments are closed